Specs at a Glance: Two Flagship 360mm Liquid Coolers
Both the ASUS ROG RYUO IV SLC 360 ARGB and Thermaltake MINECUBE 360 Ultra ARGB Sync target enthusiasts who want a premium 360mm liquid cooler with standout visuals. ASUS equips the RYUO IV with a 394 x 140 x 32mm radiator and three pre-installed 120mm ROG MF-12C ARGB fans, capable of up to 2650 RPM and controlled through a single daisy-chained cable. Its pump tops out at 3200 RPM and uses a copper cold plate with pre-applied thermal paste for quick installation. Thermaltake’s MINECUBE 360 uses a slightly slimmer 369 x 120 x 25mm radiator, with 460mm rubber-braided tubing that offers generous routing flexibility, especially in larger cases. The pump is PWM-controlled and reaches 3300 RPM, backed by an additional VRM fan that can spin up to 3500 RPM. Unlike ASUS, Thermaltake’s three 120mm fans are hot-swappable, daisy-chainable, but not pre-installed, and peak at 2000 RPM, prioritising modularity over raw fan speed.
Cooling Power and Acoustic Potential
On paper, the ASUS ROG RYUO IV leans into aggressive airflow and liquid flow to tame high-wattage CPUs. Its 32mm-thick radiator offers more fin depth than the MINECUBE’s 25mm unit, while the 2650 RPM Fluid Dynamic Bearing fans are tuned for strong static pressure, ideal for dense fin stacks and hot chips like Intel’s Core i7-14700K referenced in testing. The 3200 RPM pump helps sustain high coolant circulation under heavy workloads. Thermaltake’s MINECUBE counters with a marginally faster 3300 RPM pump and the added benefit of a 3500 RPM VRM fan to cool surrounding motherboard components. However, its lower 2000 RPM fan ceiling and thinner radiator suggest it prioritises balanced thermals and potentially lower noise over absolute peak performance. Enthusiasts chasing every degree of CPU headroom will likely favour the RYUO IV, while builders seeking solid cooling plus extra VRM airflow may appreciate the MINECUBE’s more holistic approach.
ARGB, Screens, and Aesthetic Customisation
Both coolers double as showpieces, but they pursue very different visual philosophies. ASUS turns the ROG RYUO IV into a panoramic centrepiece with a huge 6.67-inch curved AMOLED display running at 2K resolution. It supports naked-eye 3D effects, hardware monitoring overlays, and custom 3D videos, even offering a rotatable screen with unique modes like a ‘waterfall’ style display. The matte, non-reflective housing and sleeved FEP tubing give the cooler a futuristic, cohesive look. Thermaltake’s MINECUBE 360 embraces a blocky, Minecraft-inspired aesthetic with a quad TFT LCD cuboid on the pump housing. Each of the four 3.95-inch panels runs at 720 x 720, forming a cube of animated content that can be configured via TT LCD Screen software. The pump and screen are separate components, which can simplify mounting while keeping the display prominently visible. Both units offer ARGB integration and daisy-chained fans, but ASUS emphasises a sweeping panoramic canvas whereas Thermaltake leans into a playful, voxel-like cube identity.
Build Quality, Installation, and Compatibility
ASUS focuses on a streamlined installation with the RYUO IV: the three 120mm fans come pre-installed and daisy-chained, and a single cable handles both ARGB and fan control. Pre-applied thermal paste on the copper cold plate further reduces setup time. The 200mm (diameter) FEP-sleeved tubing, centred on the radiator, is designed to open up mounting options while retaining a clean, premium look inside the chassis. Thermaltake’s MINECUBE 360 goes for maximum flexibility. Its 460mm rubber-braided tubes make it easier to route the radiator in large or complex cases, though the 143mm pump-plus-screen height demands a check on internal clearance. The fans are not pre-installed but are designed to be hot-swappable and daisy-chainable, which advanced users may appreciate for future upgrades or replacements. Compatibility is also broader on the MINECUBE, extending from modern Intel LGA 1851/1700 and AMD AM5/AM4 to a long list of legacy sockets, making it an attractive drop-in for older platforms.
Which 360mm AIO Cooler Should You Choose?
Choosing between the ASUS ROG RYUO IV and Thermaltake MINECUBE 360 comes down to priorities. If your build revolves around sheer CPU performance, dense radiators, and high-speed fans, the RYUO IV’s thicker radiator, 2650 RPM MF-12C ARGB fans, and panoramic 2K AMOLED display make it the obvious choice for overclocked gaming rigs and content creation workstations where every degree matters. The MINECUBE 360, meanwhile, targets users who want strong all-round cooling, maximum compatibility, and a more playful aesthetic. Its long tubing, separate pump and cube display, and integrated VRM fan suit spacious cases and motherboards that run warm around the socket. The quad-LCD cube delivers a unique visual signature for themed or Minecraft-inspired builds. In short, pick the ASUS ROG RYUO IV if you want a performance-first, futurist showpiece, and choose the Thermaltake MINECUBE 360 if you value flexibility, broader platform support, and a distinctive cuboid display.
