Lian Li Vector V150 INF Review: MicroATX Flash With Smart Airflow

Verdict: A Compact Showpiece For RGB-Focused MicroATX Builders

The Lian Li Vector V150 INF is a compact MicroATX PC case that combines an infinity mirror front design, strong airflow options, and modern high-speed I/O to target enthusiast builders who want a small, visually striking chassis without stepping into ultra-premium territory. From a reviewer’s perspective, the bottom line is clear: this is a style-forward microATX case that still behaves like a practical enclosure. You get striking front-panel infinity mirrors around dual fans, plus an addressable RGB strip framing the front, giving the case a distinctive, layered lighting effect that stands out in its price class. At the same time, there are enough airflow paths, fan mounts, and cable-routing touches to satisfy performance-focused users, provided you are willing to work around a few installation quirks and minor usability misses.

Design, Infinity Mirrors, and Front I/O Speed

This MicroATX case review has to start with looks, because the Vector V150 INF wears its identity on its face. Lian Li’s trademark infinity mirrors sit front and center around a pair of cooling fans, creating stacked reflections that give the front panel serious “head-turning” appeal without pretending to be ultra-expensive glasswork. These mirrors are backed by an ARGB strip running around the front-panel perimeter, tying the lighting together into a cohesive effect that screams compact enthusiast chassis rather than budget box. Functionally, the front I/O is pleasingly up to date: you get a USB 3.2 Type-C port supporting Gen 2x2 speeds up to 20Gbps, flanked by two USB 3.2 Gen 1 Type-A ports at 5Gbps plus a four-pole headset jack for either standard headphones or a combo headset with microphone. The only odd omission is that the power and reset buttons lack any indicator lighting, so you rely on the RGB glow to know the system is on.

Airflow Layout, Cooling Flexibility, and Drive Support

From a PC case thermal performance perspective, the Vector V150 INF is built to move air rather than hide it behind solid panels. You get a rear fan and grille, plus a perforated right-side panel to give components fresh intake or exhaust paths depending on your fan layout. The top and front panels pull straight off, revealing two 140mm front mounts populated with factory fans and a dual-format radiator or fan bracket up top that accepts either 140mm or 120mm hardware. There is roughly 424mm of space for a 360mm-format radiator, though a 280mm option may be tight due to the limited clearance above the motherboard. On top of the power-supply shroud, threaded holes accept two 120mm fans, with special screws included, turning the shroud into a useful extra intake or exhaust position for GPUs. Storage support is reasonable: up to two drives ahead of the PSU bay with dual 3.5-inch/2.5-inch mounting patterns, though realistically you are limited to one 3.5-inch plus one 2.5-inch or two 2.5-inch drives due to cabling space.

Building Experience, Cable Management, and Real-World Trade-Offs

Where many compact enthusiast chassis fall apart is in the build stage, but Lian Li does some thoughtful work here. Two rows of cable passages surround the motherboard tray, letting you route wiring cleanly whether you use a traditional MicroATX board or one with reverse connectors. Expansion-slot access on the rear panel is better than in many budget rivals, with a full-height panel that simplifies swapping cards in and out while helping support long GPUs. There are also upper and lower card-brace brackets to minimize sag and movement during transport, a welcome touch for heavier graphics cards. However, the build is not friction-free. The ARGB strip cable on the front panel arrives tightly zip-tied, so removing or servicing the front assembly can involve frustrating cutting and re-routing. The mesh fan covers in the face panel are also stubborn to remove, which complicates cleaning. Thick 240mm radiators on the side can force their fans into the flow path of the front fans, undermining clean airflow paths.

Value Judgment: Who the Lian Li Vector V150 INF Is For

The Vector V150 INF positions itself as a compact enthusiast chassis that delivers showpiece looks and practical airflow without shedding the small conveniences that make daily use pleasant. Reviewers note that despite its under-hundred price positioning, “we didn’t see any serious cost-cutting measures that might reduce the case’s value in its price class,” and that the retained basics “help make the V150 INF a remarkable value in a market where many competitors have dropped those kinds of perks to slash the price tag.” This makes it attractive to MicroATX builders who want high-speed USB-C connectivity, flexible fan and radiator support, and cleaner cable routing than you usually see at this level. The trade-offs are mostly about ease of maintenance and specific cooling configurations, not about missing core features. If you value clean lines of sight, RGB-heavy aesthetics, and a well-ventilated layout more than tool-less everything or maximal drive capacity, the V150 INF fits the brief.

• Buy the Lian Li Vector V150 INF if you want a compact enthusiast chassis with an eye-catching infinity mirror front panel and ARGB strip lighting that becomes the visual centerpiece of your setup.
• Skip the Lian Li Vector V150 INF if you rely on clear power and drive activity LEDs on the front panel and dislike depending on RGB lighting as your only status indicator.
• Buy the Lian Li Vector V150 INF if you need modern, high-speed I/O like USB 3.2 Gen 2x2 Type-C plus dual Gen 1 Type-A ports on the front for fast external storage and accessories.
• Skip the Lian Li Vector V150 INF if you plan to use very thick 240mm or 280mm radiators and want guaranteed, conflict-free mounting options without airflow compromises.
• Buy the Lian Li Vector V150 INF if you are building a MicroATX system and care about tidy cable management through dual rows of routing cutouts and support for reverse-connector boards.
• Skip the Lian Li Vector V150 INF if you frequently reconfigure or deep-clean your front panel and want easily removable ARGB cabling and mesh fan covers without cutting zip ties or wrestling with panels.